Using a teensy 2.0 as a avrisp mkii programmer install#
Using a teensy 2.0 as a avrisp mkii programmer pro#
Using a teensy 2.0 as a avrisp mkii programmer windows#

Using a teensy 2.0 as a avrisp mkii programmer pro#

So close, yet so far! Thanks for any advice you can provide.īTW, it is a Solidoodle 2 Pro model with a 6圆 bed.

Using a teensy 2.0 as a avrisp mkii programmer windows#

Pressing the reset button does cause Windows to chime so I know I am pressing the reset button well enough for it to register. I did verify that Windows chimes when I connect the board. ' The board does not respond to the reset button, the jumper, bending the pins together, connecting them with a piece of metal or anything else.

Stuck on step 29, 'Waiting for Teensy device.

Using a teensy 2.0 as a avrisp mkii programmer install#

ino (Arduino > File > Preferences > uncheck the box 'Update sketch files to new extension on save.' For step 3, I did not install the libraries with Teensyduino.įor step 12.1, I changed it to VERSION_2 instead of VERSION_3 as I have an SD2.įor step 22, I ended up with a '' file.įor step 24, I used my file instead of the suggested (because I didn't get a file like this, despire showing hidden files and folders). I also changed the preference to save in. For step A, I had to use Arduino 1.6.6 (all the others had errors compiling). I followed the directions exactly, line by line. So here is what I have done and what has happened: Here is the latest, I am following this and here is my experience: I think (hope!) I am making progress. Once I solve this, I will be sure to post the solution in the form of a YouTube video on my channel to help others out who might encounter the same frustration. LMK what you need to know in order to help point me in the right direction. I could write a book about the journey I have taken to get here, but instead I thought I would start with this description and I see if there is anyone out there that could possibly help. The links to the reprap version are dead here and here. I cannot find a version of Arduino 022 that will verify and compile for this board (AT90USB1286), the links on the Solidoodle site are dead. I cannot find the settings in the hex file using hex editing software.

The way I see it, I either need to modify the configuration.h file using Arduino 022 or find some way to modify the config in this Solidoodle2_ file. After tons of tinkering, I seem to have bricked the board, but using an Atmel AT AVRISP mkII I was able to flash Solidoodle2_6142013.cpp,hex back onto it. We did some upgrades to it and now we want to change the max temp to support the new hotend, but nothing can talk to this board over USB. In short, I cannot find the modified arduino version to compile firmware for this printer.

I have been going crazy for weeks, just found r/solidoodle and thought I would ask here as Solidoodle seems to be belly up, their support is long, long gone as best I can tell. I am looking for a little help modifying the firmware on my SD2. I am fairly handy with computers and hardware, thought I could figure this out, but I keep hiting dead ends (starting with the dead links on the Solidoodle site).